|
|
Installation
Some vehicles require more work than others due to their unique bulb
housings.
Possible removal of the bumper required - Check in your Vehicle owners
manual.
- First and foremost disconnect the car battery terminal.
- Remove the factory light bulbs
- Replace with the xenon bulbs. (If your vehicle has a dust cap, please
replace with something equivalent to ensure a good seal.)
*If the bulbs are dirty, use rubbing alcohol to clean the bulbs, do not
immerse it in any liquid.
- Find a mounting location for the ballast.
- Do not drill holes on the box.
- Mount away from moving components, such as A/C or power steering pump.
- Mount to a solid location.
- Mount to a good ventilation location (such as under the headlight for some
vehicles.)
- Some vehicles require headlight and bumper to be removed during
installation.
- Allow the necessary distance for the base connector to reach the bulb.
- Plug Ignitor adaptor to the xenon bulbs; make sure the bulbs are secured
tightly and dust cover cap is properly enclosed.
- Run wiring harness in the engine bay.
- Avoid placing harness next to or close to liquids and moving parts.
- Use zip ties to secure the wiring harness.
- Attach the power plugs to each ballast, make sure the plugs are securely
placed and that it is firmly intact.
- Reconnect the car battery cables and make sure all components are secured.
- Turn light switch on and enjoy your brand new Xenon headlights.
|
|
|
|
